Spiral Tension  Edge Wound Crimped Finned Tube

Helical Spiral Wound Finned Tube

Spiral crimped finned tubes are manufactured at TAAM engineering on specially developed high speed finning machines. Our machines are capable of finning tubes in lengths up to 18 meters (60 feet). We make finned tubes with base tubes of carbon steels, stainless steels, copper and copper alloys like cupro-nickels, admiralty brass, aluminum brass with copper fins, stainless steel fins and GI (galvanized iron) fins. The base tubes of our standard edge wound crimped fin tubes range from 16 mm to 120 mm with fin heights ranging from 3 mm to 16 mm. We have in-house facility for surface finishing finned tubes that includes grit blasting, zinc thermal spray galvanizing, epoxy painting, HR aluminum painting, and phosphating. The finned tubes can be supplied as hot dip galvanized.

We suggest root soldering of the tension wound fins to the outer surface of the tube to minimize air gaps between the fin and the tube for improved efficiency.

Currently we manufacture crimped fin tubes with 5 fpi to 12 fpi.

stainless steel tubes spirally finned with stainless steel fins

spiral tension wound fin tubes galvanized after finning

TAAM engineering

B-222,MIDC, Malegaon

Sinnar, District Nashik

India 422 103


+91 2551 230923


+91 253 2473005

+91 2551 230923


+91 9890945650




Home | Root Soldered Wire Wound Fin Tubes | Spiral Tension Wound Crimped Finned Tubes | Wire Matrix Tube Inserts | Soldered Wire Loop Turbulators | Twisted Tape Tube Inserts| Steam Air Heater |Thermic Fluid Air Heater | Hot Water Air Heater | Air Cooled Oil Cooler | Air Cooled Vapor Condenser | Air to Air Heat Exchanger | Air and Gas Pre-heater | Industrial Air Cooler | Industrial Air Chiller | Process Design of Finned Tube Heat Exchanger | Improvement of Dryers and Drying System | Contact Us